Производитель:
Год выпуска: 2014
Продолжительность: 04:40:05
Тип материала: Видеоурок
Язык: Русский
Стоимость: 1990 рублей
Описание:
This course is lab-based and is focused on the technologies from Cisco CCNP Route/Switch (300-101). Each Nugget is designed assist you in creating and verifying Cisco networks using GNS3 1.x. All of this can be done on a single computer without external hardware (no physical routers or switches required). For theory and additional training regarding the technologies implemented in this course, please refer to our CCNP Route 300-101, IPv6 and GNS3 1.x Fundamentals courses here at CBT Nuggets.
Related area of expertise:
Cisco intermediate level and general networking
Recommended skills:
Basic understanding of concepts taught in ICND1/ICND2 and CCNP Route 300-101
Recommended equipment:
GNS3 v1.x
Cisco IOS image (12.x or 15x) supported by GNS3
Optional: VIRL, live gear or simulators/emulators supporting the technology in the lab may be used instead of GNS3 v1.x.
Related certifications:
Cisco CCNP Routing and Switching
Cisco CCIE Routing and Switching
Related job functions:
Network technician
Network engineer
This CBT Nuggets Hands-on Labs course provides training on how to create a practice environment for individuals interested in mastering networking technology through practicing hands on!
[wpspoiler name="Подробное описание" ]
1. Ladies and Gentlemen, start your engines... (00:03:53)
In this Nugget, Keith provides an overview of the course and points out some resources available to assist you in building your own practice lab environment.
2. DMVPN Lab (00:24:24)
In this Nugget, Keith walks you through the creation of a DMVPN network from the ground up. The topology diagram and all the configuration commands used are available in the NuggetLab files.
For training on adding IPsec to a DMVPN network, please watch the Nugget "Protected DMVPN" in our CCNP Security SIMOS (300-209) course.
3. IPv6 RIPng Lab (00:10:11)
In this Nugget, Keith walks you through the configuration and verification of IPv6 and RIPng. Configuration commands and the topology diagram used are available in the NuggetLab files.
For more detailed training on IPv6, watch our IPv6 course.
4. IPv6 ACL and VTY (00:09:49)
In this Nugget, Keith walks you through building an IPv6 topology, an IPv6 Access Control List (ACL), and then using the ACL to control access through the VTY lines. The configuration commands and topology diagram are in the NuggetLab files.
5. Frame Relay Multi-Point (00:13:43)
In this Nugget, Keith demonstrates how to create a frame relay switch using an IOS router, and then builds and verifies a multi-point network. The configuration commands used and topology are in the NuggetLab files.
6. Frame Relay Point-to-Point (00:14:04)
In this Nugget, Keith demonstrates how to create a frame relay switch using a IOS router, and then builds and verifies a point-to-point network. The configuration commands and topology used are in the NuggetLab files.
7. IPv4 EIGRP Summarization (00:14:57)
Less is sometimes better than more, and summarization of networks can reduce the number of routes that have to be shared. In this Nugget, Keith builds a topology and walks you through manual and automatic summarization of EIGRP networks. Commands used and the topology diagram are in the NuggetLab files.
8. IPv4 EIGRP Distribute-list (00:06:36)
In this Nugget, Keith walks you through the creation of an EIGRP topology, and then implements distribute-lists to control which networks are advertised to EIGRP neighbors. The NuggetLab files include the commands and the topology diagram used in this video.
9. IPv4 EIGRP Authentication (00:06:07)
In this Nugget, Keith walks you through implementing and verifying EIGRP authentication. The configuration files and topology diagram are part of the NuggetLab files.
10. Named EIGRP and VRF Support (00:09:06)
This Nugget demonstrates how to lab up and verify named EIGRP to support a Virtual Routing and Forwarding (VRF) instance. The commands used are in the NuggetLab files.
11. EIGRP Stub (00:07:44)
Stub configuration allows faster convergence when a route goes missing in a EIGRP network. In this Nugget, Keith walks you through the creation of a lab environment using GNS3 to test and see the results of using the EIGRP stub. Commands used in this video are in the NuggetLab files.
12. Policy-Based Routing (PBR) (00:12:43)
In this Nugget, Keith walks you through the creation of a lab environment using GNS3 to test and see the results of Policy-Based Routing. The commands used, as well as the topology diagram, are in the NuggetLab files.
13. Variance (00:15:20)
In this Nugget, Keith walks you through labbing up and verifying EIGRP variance. The configuration commands and topology diagram used are in the NuggetLab files.
14. IPv6 OSPFv3 Virtual-link (00:16:34)
Keith demonstrates how to implement and verify IPv6 virtual-links. The full set of commands and the topology diagram used in this Nugget are in the NuggetLab files.
15. IPv4 OSPF Basics (00:09:34)
In this lab-based Nugget, you build and verify and IPv4 OSPF network. Configuration commands and the topology diagram used are in the NuggetLab files.
16. OSPF Stub (00:11:46)
Keith walks you through configuring a IPv4 OSPF network and seeing the direct effects of stub and totally stubby areas. The full commands and the topology diagram used are in the NuggetLab files.
17. Redistribution (00:19:26)
In this Nugget, Keith walks you through the configuration and verification of OSPF and EIGRP bidirectional redistribution on multiple routers. The topology diagram and all the commands used in this Nugget are in the NuggetLab files.
For more training on the concepts of redistribution, please watch Jeremy's Cioara's in-progress CCNP Route course.
18. Sub-optimal Routing (00:13:14)
This lab-based Nugget begins by using the topology created in a previous Nugget titled, "Redistribution," and then identifies and corrects sub-optimal routing in a redistributed network. The commands used in this lab are in the NuggetLab files.
19. uRPF (00:12:02)
Unicast Reverse Path Forwarding (uRPF) checks can help prevent malicious packets from entering our network. In this lab-based Nugget, Keith walks you through the configuration and verification of uRPF. The configuration and network diagrams are in the NuggetLab files.
20. IP Helper (00:08:09)
In this lab-based Nugget, Keith walks you through setting up and verifying the IP helper feature on a Cisco router. Configuration commands and topology diagram used in the video are included in the NuggetLab files.
21. BGP (00:12:12)
In this lab-based Nugget, Keith walks you through the configuration and verification of a BGP network. Full configuration commands used, as well as the topology diagram, are in the NuggetLab files.
For more training on the theory and operations of BGP, search for "BGP" on the CBT Nuggets website.
22. IPv6 EIGRP and Variance (00:11:10)
In this lab-based Nugget, Keith walks you though the configuration and verification of an IPv6 EIGRP network. The NuggetLab files include the commands used and the topology diagram.
23. NTP (00:06:45)
In this lab-based Nugget, you create an topology in GNS3 that includes NTP and verify that it is working. The packet capture, configuration commands, and topology diagram for this Nugget are included in the NuggetLab files.
24. IPv6 in IPv4 Tunneling (00:10:36)
In this lab-based Nugget, Keith walks you through the creation and verification of an IPv6-in-IPv4 tunnel. The commands used, topology diagram, and the packet capture file created in this Nugget are included in the NuggetLab files.
[/wpspoiler]
